https://www.youtube.com/@VladLupashevskyi engineerd this solution for the w211 along with a lot of interesting sensors to add to the w211 menu
Blog
Diagnose and Replace Tie Rod Ends
In this video we go over quickly how to diagnose and replace inner tie rods. These will often present as clunking noises.
Tank Avoids Mercedes In Tripoli
My clients in Libya are telling me the fighting is growing worse. Perhaps in this show of respect a tank drives out of the way of a Mercedes choosing to hit instead a Kia down a narrow road.
Replace Mercedes Benz Hood Struts
Affiliate Link to C205 Hood Struts: https://amzn.to/44FmHl4 This fix helps your hood stay up and not fall from worn out hood struts.
E63S TCU and ECU
E63S Air Intakes
CLS550 Air Intakes
C55 with M113k 630cc injetors and 70mm clutched pulley
Sometimes being a tuner means responding with joy to complaints…
How to Make Mercedes M157 and M278 Air Intakes
In this short video we show how we make our m157 and m278 air intakes.
All You Can Tune Deals
We now offer a low price on combined ECU, TCU and CPC tuning.
Why TunedMercedes Focuses on 3D Printed Performance Parts
What does a TCU tune feel like?
A TCU tune main impact isn’t in the adjusting of how a transmission shifts but in the overall performance of a vehicle from a dig. The reason isn’t that it doesn’t affect the shifting, it is more that the removal of torque limiters not only allow more power to be […]
High Speed High RPM Cut Out
In this video I discuss some issues that may cause to a high speed high rpm power cut condition.
Connecting Magic Motorsports StageX and EVC WinOLS
WinOLS allows the editing of raw binary files by allowing users the option to define the editable regions into maps. Alternatively you can buy map packs, or A2L’s , or Damos files to show you where the maps are and how they are defined in terms of scaling and more. […]
Testing the C63 On Our New Lift
We have had a few people ask us for work which would be much better suited with a lift. In this case we have our Mid-Rise Scissor lift up and running. Like our garage HVAC this process was more difficult than just ordering a part. There were other “supporting” parts […]