Tuning and Customization
There are some basic things one must get to start to print reliably well. This isn’t exactly intuitive either, but they are Leveling Layer Adhesion Build Plate Adhesion Environment If any of these are off a failure or weak point in a print can occur. However if some of these […]
We learned recently that Mercedes Benz will use China’s Geely manufacture to make the CLA 2026 engine. This isn’t a huge departure as TunedMercedes members on facebook.com/groups/TunedMercedes have pointed out that the current engine is made by Nissan Renault. I am not sure how to feel about this, and I’m […]
I just published a video which will represent a teaser of the information one would acquire by signing up for our $99 per month tuning school on youtube.
I had the pleasure of spending time at Read Beard Racing and Magic Motor Sports. Check out the video here. Overall I was impressed with what I saw with stagex. I will post more details later.
Opening exhaust valves can be done with a module or via coding. This is a good option for those who have a broken valve or those who have replace the valve who do not wish to have a hard fault. This is also a good option for those who wish […]
With big 3D prints it is prudent to quickly level the print bed before execution. This is because small changes in level can throw off larger prints and cause poor layer adhesion at higher than expected layers; which can defeat watching the first few layers apply to ensure good adhesion […]
Magic Motorsports is an Italian company that just opened up a US division in Miami, FL. Magic makes perhaps the gold standard for flashing tools the “flex”. They also make the IXI personal flasher which I hope to review shortly. This is an OBD only device which can be set […]
Over the last few days we have been making improvements to the page speed of tunedmercedes. Please see this video for information about work completed already as we undertake more to provide a better experience. https://youtube.com/shorts/BCAhm3Mqxaw
Colder spark plugs are better suited to high engine loads and perform worse in cold start and idle. Adding E85 or an e flex tune like E30 along with colder spark plugs may make your idle even rougher. See this video for more information: https://youtube.com/shorts/yJ605bT0_TE
For our October 2024 our promotion will be $250 off of all of our tunes. Check out our video announcement here: https://youtube.com/shorts/p-k20SxnG9w
We have added updated pricing and applications for BlackBoost air intakes. We will begin to add more BlackBoost products across the board including some of our first non-Mercedes application parts to be listed on the website. After this we will update product catalogs on our site to be more inclusive […]
We have just finished another update of our M276 air intakes. In this revision provisions were made for the MAP sensors. We made this version by deleting a space in our tubing and adding an extruded tube with the appropriate dimensions. These air intakes are printed out of polycarbonate and […]
We have recently added two new wicker chairs and retro games. Our retro games will be of limited editions and our first is the V-Saturn. The Sega Saturn is very hard to emulate and it launched in three main versions, the Hi-Saturn, the V-Saturn, and the normal Sega Saturn. We […]
We are building out a wholesale network please contact us if you would like to learn more.
Posted yesterday a few 3D Printing tips on instagram.com/tunedmercedes and youtube.com/@tunedmercedes. I’m going to post them here. I’ll post future videos here, and will go through some of the important past posts to link with videos. https://youtube.com/shorts/onaPZtmsHGg
464 G63 Front Pads
$45.00
M276 VRP Intercooler Upgrade
$2,152.50
blackboost M177.1 Air Intakes
$1,599.00
PTG C190 M178 Air Inlets
218 CLS 550 Front Rotors
$150.00